| The pictures shown are sample photos. The actual appearance of the equipment features and their specific attachment to the product may differ from the pictorial representations, but will have the same functionality. |
 STIHL M-TRONIC
RELIABLE WORK WITH THE BEST PERFORMANCE. With STIHL M-Tronic, you’ll have the best performance from your work tool from the outset. Fully electronic engine management regulates the ignition timing and fuel metering in all work situations, taking into account external conditions such as temperature, altitude and fuel quality. |
 STIHL ANTI-VIBRATION SYSTEM
FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring. |
 TOOL-FREE FUEL CAP FOR OIL AND FUEL TANKS
QUICK AND EASY TO USE. With tool-free fuel cap, you can open and close oil and fuel tanks in just a few simple steps, thanks to a bayonet closure. |
 STIHL 2-MIX ENGINE
FOR FEWER STARTING STROKES. The manual fuel pump reduces the number of strokes required to start the power tool, making the start-up process quicker and easier This is particularly helpful after longer breaks in operation. To use it, actuate the pump several times before starting. This will ensure that there is enough petrol in the carburettor when starting. |
 STIHL ERGOSTART
EFFORTLESS STARTING. STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier. |
 STIHL FOUR-CHANNEL TECHNOLOGY
FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine. |
 COMPENSATOR
REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance. |
 STIHL EMATIC SYSTEM
REDUCES OIL CONSUMPTION. The STIHL Ematic system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a controlled-delivery oil pump. It ensures that the chain oil gets to where it is needed for lubrication. This allows you to reduce oil consumption by up to 50%. If you often work in dusty conditions or if you use long guide bars, you can quickly and easily increase the oil quantity at any time with the new oil pump system. |
 SIDE-MOUNTED CHAIN TENSIONING
FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine. |
 CONTROLLED-DELIVERY OIL PUMP
The exact chain oil output can be adjusted manually for varying conditions, allowing for a reduction of up to 50%. |
